BDO-SERIES
(X/Y AXES LINEAR GUIDE WAYS,
Z AXIS BOX WAY) |
|
|
| VERTICAL MACHINING CENTER 》5 AXIS MACHINE |
 |
| |
Model |
HPA-10FA |
| TRAVEL |
X AXIS (mm) |
800 |
| Y AXIS (mm) |
510 |
| Z AXIS (mm) |
510 |
| A-axis rotation angle |
(+30°~-120°) |
| C-axis rotation angle |
360 |
| Distance from Spindle Nose to Table(mm) |
150~660 |
| Distance from Spindle Center to Surface of Column Way(mm) |
624 |
| TABLE |
Table Size(mm) |
ø320 |
| T-Slot Size(mm) |
12 |
| Working Area(mm) |
ø320 |
| Max. load level / tilt(kgs) |
100/75 |
| Minimum scale units |
0.001° |
| The disk maximum speed (rotary axis / dumping axis) |
25rpm |
| Resistance to cutting force(kg-m) |
25 |
| Brake torque (rotation axis / dumping axis)(kg-m) |
140/70 |
| Positioning accuracy (rotary axis / dumping axis) |
"20""/60"" |
| Repeatability accuracy (rotary axis / dumping axis) |
"4""/8"" |
| SPINDLE |
Spindle Taper (BT/CAT) |
BT40/CAT40 |
| Spindle Speed (RPM) |
10000 |
| FEEDRATE |
Rapid Traverse(m/min) |
32/32/28 |
| Cutting Feedrate(mm/min) |
1~10000 |
| MOTOR |
Spindle Motor (Cont. /30min./10min.)(kw/hp) |
7.5/11/15(10/15/20) |
| For X/Y/Z Axis Servo Motor(Fanuc)(kw/hp) |
X,Y,Z:4/7/7(5.4/10/10) |
| Coolant Pump(kw) |
0.86 |
| Lubrication Pump(kw) |
0.025 |
| ATC |
Magazine Capacity |
24 |
| Max. Tool Diameter(mm) |
80/130 |
| Max. Tool Length(mm) |
300 |
| Max. Tool Weight(kg) |
7 |
| ATC Type |
Arm Type |
| Tool Choose Method |
Short Cut for Tool Choose |
| MISC. |
Air pressure |
6 Kg / cm² |
| Electricity demand |
220V,3phase,50/60HZ |
| Machine Weight(kg) |
7000 |
| Machine Dimension (Lenghth×Width×Height) |
2250*2610*2650(mm) |
| Controller |
|
31IMB//31IMB5/31IA5 |
| *Specification is subject to changte without further notice. |
|
STANDARD ACCESSORIES
 Heat Exchanger for Electric Cabinet
Program Execution/End/Abnormal Three Color
Indicate Light
Central automatic lubrication system
24 tool automatic tool change system
Automatic power-off system
Rigid tapping
Oil Circulating Coolant System for Spindle
Spindle Air Blast
The triaxial screw cooling device
Halogen work lamp
Fluorescent lamp
The cutting liquid cooling system
RS-232 interface
Water gun and air gun
Fully Enclosed Splash Guard
Dual chip auger
Oil Skimmer
The chain-type chip conveyor
Toolbox (including adjustment tools) and adjusted
on the basis of block
Maintenance and operating instructions set
|
OPTIONAL ACCESSORIES
The optical scale full closed-loop feedback system
Direct Driven 12,000RPM/15,000RPM Spindle
Oil mist blowing device
Oil mist recovery unit
Coolant Through Spindle A Type(20/70 Bars)
Electrical box cooling machine device
|
|
|
|
|
