| Model | Unit | A-10L | |
| SPINDLE | SPINDLE TAPER | NO.40 | |
| TRANSMISSION | DIRECT DRIVEN | ||
| SPINDLE SPEED | r.p.m. | 10,000 | |
| SPINDLE DIAMETER | mm | 150 | |
| TABLE | TABLE SIZE | mm | 1,200 x 600 |
| T-SLOT | mm | 18 x 5 x 100 | |
| WORK AREA | 1,020 x 600 | ||
| MAX. TALBE LOAD | kgs | 700 | |
| TRAVEL & FEEDRATE | X AXIS | mm | 1,020 |
| Y AXIS | mm | 600 | |
| Z AXIS | mm | 600 | |
| DISTANCE FROM SPINDLE NOSE TO TABLE |
mm | 150 ~ 750 | |
| DISTANCE FROM SPINDLE CENTER TO SURFACE OF COLUMN WAY |
mm | 655 | |
| RAPID TRAVERSE (X/Y/Z) | mm/min | X,Y,Z : 32 / 32 / 24 | |
| CUTTING FEEDRATE | mm/min | X,Y,Z : 1 ~ 12,000 | |
| ATC | TOOL SHANK | BT - 40 | |
| PULL STUD | MAS P40T-1 (45°) | ||
| MAGAZINE CAPACITY | pcs | 24 | |
| MAX. TOOL DIAMETER (FULL STORAGE) |
mm | ø80 | |
| MAX. TOOL LENGTH | mm | 300 | |
| MAX. TOOL WEIGHT | kgs | 7 | |
| ATC TYPE | ARM TYPE | ||
| MOTOR | FOR SPINDLE(CONT./30 min.) | kw (hp) | 7.5/11 (10/15) |
| X/Y/Z AXIS | kw (hp) | 3/3/4 (4/4/5.4) | |
| LUBRICATION PUMP | kw (hp) | 0.025 | |
| COOLANT PUMP | kw (hp) | 0.49 | |
| MISC. | MACHINE HEIGHT | mm | 3,085 |
| MACHINE SPACE | mm | 2,800 x 2,736 | |
| MACHINE WEIGHT | kgs (lbs) |
6,500 (14,991 lbs) | |
| CONTROLLER(Fanuc/MITSUBISHI) |
Fanuc 0iMF |
*Specification is subject to change without further notice.
 Standard Accessories 1.Fanuc 0iMF Controller 2.Heat Exchanger for Electric Cabinet 3.Program Executiion/End/Abnormal Three Color Indite Light 4.Quartz Work Lamp 5.Fluorescent Lamp 6.RS-232 Interface 7.Oil Circulating Coolant System for Spindle 8.Spindle Air Blast 9.Automatic Lubrication Equipment 10.Protection Device for Three Axes Slide Ways 11.Full Splash Guard 12.Rigid Tapping 13.Auto Power Off 13.Auto Power Off 14.Single Screw Type Equipement on Y Axis Central (A-600 only) 15.Y-Axis Screw Type Chip auger (2 pcs) (A-10L only) 16.Tool Box w/Leveling Bolt 17.Machine and Electric Operation Manual 18.(380/220V) Transformer (Exclude India,USA and Canada) 19.CE/CSA Electrical Specification (For European/Canada Only) |
Optional Accessories 1.Fanuc 31iMB Controller 2.Mitsubishi M80A controller 3.Belt Driven Spindle 10,000RPM (A-10L only) 4.Direct Driven Spindle 10,000/12,000/15,000RPM 5.Armless Type 16 tools ATC. (A-10L only) 6.Hinge Type Chip Conveyor 7.Taiwan made PMI roller-rail linear guideway 8.Japan made THK/NSK ball-rail/roller-rail linear guideways (A-10L only) 9.Coolant-thru tool holder 10.Three Axes Optical Linear Scale 11.Oil Mist 12.Oil Mist Collector 13.Coolant Through Spindle A Type (20 Bars) 14.Renishaw TS-27R Tool Setup Probe (Tool Setter) 15.Disc Type Oil Skimmer 16.CNC Rotary Table 17.Air Conditioning Equipment for Electric Cabinet 18.4th Axis Interface |
