| Model | Unit | DSV-500/DSV-500S | |
| SPINDLE | SPINDLE TAPER | NO.40 | |
| TRANSMISSION | DIRECT DRIVEN | ||
| SPINDLE SPEED | r.p.m. | 10000 (Standard) | |
| SPINDLE DIAMETER | mm (inch) |
150 (5.91) |
|
| TABLE | TABLE SIZE | mm (inch) |
1300x600(DSV-500)/1000*500*2PC (DSV-500S) (51.18x23.62)(DSV-500)/(39.37x19.69)(DSV-500S) |
| T-SLOT | mm (inch) |
18 x 5 x 100 (0.71x5x3.94) |
|
| WORK AREA | mm (inch) |
1100x600 (DSV-500)/1000x500(DSV-500S) (43.31x23.62)(DSV-500)/(39.37x16.69)(DSV-500S) |
|
| MAX. TALBE LOAD | kgs (lbs) |
800 (DSV-500)/300*2(DSV-500S) 1764(DSV-500)/661.4(DSV-500S) |
|
| TRAVEL & FEEDRATE | X AXIS | mm (inch) |
500 (19.69) |
| Y AXIS | mm (inch) |
560 (22.05) |
|
| Z AXIS | mm (inch) |
570 (DSV-500)/420(DSV-500S) (22.44)(DSV-500)/(16.54)(DSV-500S) |
|
| DISTANCE FROM SPINDLE NOSE TO SURFACE | mm (inch) |
150-720 (DSV-500)/150-570(DSV-500S) (5.91~28.35)(DSV-500)/(5.91-22.44)(DSV-500S) |
|
| DISTANCE FROM SPINDLE CENTER TO SURFACE OF COLUMN WAY | mm (inch) |
655 (25.79) |
|
| RAPID TRAVERSE (X/Y/Z) | M/min (ipm) |
X,Y,Z:36/36/30 (standard) (1,416/1,416/1,181) |
|
| CUTTING FEEDRATE | M/min (ipm) |
X,Y,Z: 1~12,000 (standard) (469) |
|
| ATC | TOOL SHANK | BT-40 | |
| PULL STUD | MAS P40T-1(45°) | ||
| MAGAZINE CAPACITY | pcs | 24 (LEFT)+24 (RIGHT) | |
| MAX. TOOL DIAMETER (FULL STORAGE) | mm (inch) |
φ80 (3.15) |
|
| MAX. TOOL LENGTH | mm (inch) |
300 (11.81) |
|
| MAX. TOOL WEIGHT | kgs (lbs) |
7 (15.4) |
|
| TOOL CHANGE TIME | 3 SEC. | ||
| ATC TYPE | ARM TYPE | ||
| MOTOR | FOR SPINDLE (CONT./30 min.) | Kw(Hp) | 11/15KW(15/20HP) |
| X/Y/Z Axes(Fanuc) | Kw(Hp) | 3 / 3/ 3 x 2 Kw (4/4/4*2 Hp) | |
| MISC. | MACHINE HEIGHT | mm (inch) |
3080 (DSV-500)/3070(DSV-500S) (121.26)(DSV-500)/(120.7)(DSV-500S) |
| MACHINE SPACE | mm (inch) |
4000x3520(DSV-500)/4560x4270(DSV-500S) (157.48x138.58)(DSV-500)/(179.4x167.9)(DSV-500S) |
|
| MACHINE WEIGHT | kgs | 8000(DSV-500)/9500(DSV-500S) (17600)(DSV-500)/20944(DSV-500S) |
|
| CONTROLLER | 0iMF 8.4" (standard) |
*Specification is subject to change without further notice.
 Standard Accessories 1. 0iMF 8.4" Controller 2. Heat Exchanger for Electric Cabinet 3. Program Execution/End/Abnormal Three Color Indicate Light 4. LED Fluorescent Lamp 5. RS-232C Interface 6. Oil Circulating Coolant System for Spindle 7. Spindle Air Blast 8. Automatic Lubrication Equipment 9.Protection device for three axes slide ways 10.Full Splash Guard 11.Rigid Tapping 12.Auto Power Off 13.Y Axis Screw Type Double Chip Augers (2 pcs) 14.Chassis Chip Flushing 15.Taiwan made roller-rail linear guideway 16.Tool Box w/ Leveling Bolt 17.Machine and Electric Operation Manual 18.Hinge Type Chip Conveyor 19. Automatic Exchange Table (APC) (for DSV-500S) |
Optional Accessories 1. Mitsubishi 80 controller 2. Japan made THK/NSK ball-rail/roller-rail linear guideways 3. Three Axes Optical Linear Scale 4. Coolant Through Spindle A Type (20/70 Bars- closed hole) 5. Renishaw TS-27R Tool Setup Probe (Tool Setter) 6. Disc Type Oil Skimmer 7. CNC Rotary Table 8. Air Conditioning Equipment for Electric Cabinet 9. 4Th Axis Interface |
