| Model | Unit | A-14 | |
| Spindle | Spindle Taper | NO.40 | |
| Transmission | Belt Driven | ||
| Spindle Speed | r.p.m. | 8,000 | |
| Spindle Diameter | mm | 150 | |
| Table | Table Size | mm | 1,550 x 700 |
| T-Slot | mm | 5x18x125 | |
| Max. Table Load | kgs | 1,400 | |
| Travel & Feedrate | X Axis | mm | 1,400 |
| Y Axis | mm | 700 | |
| Z Axis | mm | 700 | |
| Distance from Spindle Nose to Table | mm | 120 ~ 820 | |
| Distance from Spindle Center to Surface of Column Way | mm | 820 | |
| Rapid Traverse (X/Y/Z) | M/Min | X,Y,Z:32/32/24 | |
| Cutting Feedrate | mm/min | X,Y,Z: 1 ~ 10,000 | |
| ATC | Tool Shank | BT-40 | |
| Pull Stud | MAS P40T-1(45°) | ||
| Magazine Capacity | pcs | 24 | |
| Max. Tool Diameter (Full Storage) | mm | φ80 | |
| Max. Tool Length | mm | 300 |
|
| Max. Tool Weight | kgs | 7 |
|
| ATC Type | Arm Type |
||
| Motor | For Spindle (Cont./30 min) | kw | 11/15(15/20) |
| X/Y/Z Axis | kw | 3/3/4(4/4/5.4) | |
| Ball screw | X Axis (Diameter/Pitch/Accuracy) | φ45/P12/C3 | |
| Y Axis (Diameter/Pitch/Accuracy) | φ45/P12/C3 | ||
| Z Axis (Diameter/Pitch/Accuracy) | φ45/P12/C3 | ||
| Triaxial Bearings (Motor End / Bearing End) |
35TAC72B/(4/2) |
||
| Three axes linear guide way | X Axis | 45mm Width Roller Linear Guideways / 3 Slider / 2-Track | |
| Y Axis | 45mm Width Roller Linear Guideways / 2 Slider / 4-Track | ||
| Z Axis | 45mm Width Roller Linear Guideways / 3 Slider / 2-Track | ||
| Misc. | Machine Height | mm | 3,200 |
| Machine Space | mm | 3,800 x 3,350 | |
| Machine Weight | kgs | 10,000 | |
| Controller | Fanuc 0iMF |
*Specification is subject to change without further notice.
 Standard Accessories
|
Optional Accessories
|
